This method is applicable for Earthenware, Terracotta, Unglazed Brick, Hard Fired Nonabsorbent Tiles, Glazed Brick, Vitreous Tiles, Glass, Soft Stone, Hard Stone, Synthetic Stone etc.
1
Surface should be thoroughly cleaned by wire
brushing or coir brushing to remove all loose particles.
2
Treat areas of moss or mould infestation with
cleaning Solutions such as soap, hypochlorate solutions etc. Wash thoroughly
with clean water to remove residues.
3
Brushed surface should be thoroughly washed with running water to
remove all dirt, dust, loosely adhering particles.
4
Allow to dry out thoroughly before application of the paint.
Repair any cracks, holes or other imperfections
with suitable fillers.6
After the filler dries, sand to smooth finish,
with a damp clean rag, wipe away all the loose dirt and dust..7
Apply the stainer on the surface with muslin cloth
if you need a colour.Read more - Painting Tips