DIRECTIONS: To ensure homogeneity, coating materials should be thoroughly stirred prior to use. To be used within 48 hrs once the seal is broken up.
CONDITIONS: Humidity below 85%. Temperature: 20 - 50 deg. C
|
By Brush:
|
By Spray
|
5% Volume of Thinner PCT102
Use natural bristles, long hairbrushes.
Brush application may require 2 coats to achieve recommended dry
film thickness |
Air-atomized: 10-20% Volume of Thinner PCT102
Clean up: use Poly Coat Thinner T102 or aromatic
hydrocarbons Note: Use Poly Coat Thinner PC T102 for Better Performance |
REMARKS: Maximum dry film thickness per coat: 25µm dry, equals 90µm wet. While applying multiple coats give an interval long enough for the first coat to be dry before giving the second coat, usually 2 hrs. Apply two coats.
Caution:
Containers of wood guard must be sealed without air inside after using
a part of it. When containers are half full, transfer the contents to
a smaller container so that no air is present while closing. This will
ensure good shelf life even after using part of the contents.
Read more - Technical Data || MSDS || Return